LSS-F03A1A(LSS-F03-A1)採用大尺寸LCD螢幕操作，實現更理想的可視性與可操作性。
採用MPU控制雷擊波輸出，波形切換、極性切換與順序切換，可連續自動進行，使連續測試更容易操作。
可選擇手動(MANUAL)或編程(PROGRAM)模式。
手動(MANUAL)模式用於依標準進行測試或執行單次有條件的測試。
編程(PROGRAM)模式可連續執行不同條件的測試，可以更輕易地順著目的執行測試。
配備連鎖裝置，提供更優異的操作安全性。
標準配備連接輸出波形監視器的終端，可使用BNC導線連接一台示波器，輕鬆檢查波形。
可選購搭配隔離變壓器使用。
|
Parameter |
Specifications |
Remarks |
|
1.2/50μs-8/20μs Combination waveforms |
Output voltage 0.5kV to 15kV ±10% Front time 1.2μs ±30% Duration 50μs ±20% Output current 250A to 7500A ±10% Font time 8μs ±20% Duration 20μs ±20% |
Common for the all models Voltage step : 0.1kV step The setting can be from 0kV |
|
Output polarity |
Positive / Negative |
|
|
Interval |
10 sec. to 989 sec., depending on the set voltage 10 sec. (<6kV) |
15 sec. and over in 10/700 μs waveform |
|
Output impedance |
1.2/50μs waveform : 2Ω ±10% 10/700μs waveform : 40Ω ±10% |
|
|
Parameter |
Specifications |
Remarks |
|
Coupling surge waveform |
1.2/50μs-8/20μs combination waveforms |
|
|
Max. coupling surge voltage / current |
Up to the values which can be set |
|
|
Coupling network Correspondent to IEC61000-4-5 |
18μF: Between LINE - LINE (10Ω +9μF selectable) |
|
|
|
10Ω: ±9μF Between LINE - PE (18μF selectable) |
|
|
Injection mode |
Between LINE - LINE, Between LINE - PE |
|
|
Power supply lines structure for EUT |
Single phase AC: L/N/PE DC : +/-/PE |
Models: A1A/C1A |
|
EUT power capacity |
AC240V/20A MAX. 50/60Hz, DC125V/20A MAX |
Models: A1 A/C1A |
|
Decoupling coil |
1.5mH |
|
|
Phase angle control |
0 to 360° ±10° |
|
