靜電模擬器

Noiseken ESS-B3011A 靜電產生器/靜電槍/靜電試驗測試模擬器/靜電模擬器
1.完全符合IEC 61000-4-2標準 。
2.輸出電壓:contact和air discharge均達30KV
3.極性:正或負極性可切換。
4.具有IEC、手動兩種操作模式。
5.放電次數:1~999次可設定。
6.放電間隔時間:0.05~9.99秒可設定。
7.電源: AC 100~240V,50/60Hz
8.搭配選購組件,可符合ISO10605標準
P.S ESS-B3011A為ESS-2002EX/ESS-2002/ESS-2001/ESS-100L替代款式
型號 : ESS-B3011A

輸出電壓:0.20kV~30kV±5% 。
極性:正/負。
重覆週期:0.05s~9.99s±10%,0.01s步階/手動。
放電次數:1~999次,預設為1次步階或連續預設。
放電模式:接觸放電/空氣放電。
觸發模式:放電槍觸發(Gun trigger)/主機觸發(Main trigger)。
輻射模式選擇開關:內建Extra(特別)/Normal(正常)切換功能。
放電偵測:提供空氣放電模式之放電偵測功能。
預先檢測功能:高壓輸出檢測功能(由使用者操作,非校正,只是檢查)。
CR及槍頭檢測:確認CR值及槍頭(可防止錯誤的組合;無顯示指示)。
IEC位準切換功能:接觸放電模式:2.0kV、4.0kV、6.0kV及8.0kV步階;空氣放電模式:2.0kV、4.0kV、8.0kV及15.0kV步階。

警示燈:從模擬器輸出電壓時燈亮,靜電放電時燈閃爍。
充電電容/電阻:150pF±10%、330Ω±10%(內建適用於放電槍GT-30R的CR組件)。
模擬器中的充電電阻:10MΩ(加上放電槍內的43MΩ,合計53Ω)。

Items ESS-B3011A specifications  
Polarity Positive or Negative
Output voltage

0.2 to 30.0kV +/-5%

(30.5kV maximum)

0.2 to 10kV: 0.05kV step

10.0 to 30.5kV: 0.10kV step

 

Repetition cycle

0.05 to 99.9s (+/- 10%) /Manual

0.05 to 10.0s: 0.05s step

10.0 to 99.9s: 0.10s step

No. of time of discharge 1 to 999 times /continuous
Discharge mode

Contact discharge/ Air discharge

Trigger mode Gun trigger / Main unit trigger
Operation panel

Indicator: 5x7 dot matrix LED

Operation: Push-buttons (Partially lighting)

Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge mode
Pre-checking function

High voltage output checking

(by user operation.  Not the calibration but just checking)

CR & Gun head checking CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
IEC level switching function

Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step

Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step

Warning lamp

Lights up while the HV circuitry is on.

Blinks while discharges are in progress.

Charging capacitor and resistance 150pF+/-10%, 330 ohm +/-10% (built into Discharge Gun GT-30RA)
Main unit charging resistance

10M ohm

(53Mohm for combination with Discharge Gun GT-30RA)

Power supply/ Power consumption 100 to 240V AC  50/60 Hz +/-10%  62VA
Included accessories

Instruction manual

Dimensions and weight (W)270 X (H)263 X (D)200 mm (projection excluded)
Approx. 4.6 kg

Discharge Gun Model : GT-30RA

Items GT-30RA specifications
Output voltage 30.5kV Max
Polarity Positive or Negative
Repetition cycle 0.05s and over  Note) Guaranteed value is 0.1s and over (330pF and under)
Discharge mode Contact or Air
Charging resistor Built-in CR unit
Charge/Discharge capacitor & Discharge resistor Built-in CR unit
High voltage connector Composite connector of high voltage and signal line (male) (NoiseKen custom)
Operation switch Discharge trigger
LED irradiator White LED light built-in for irradiating EUT (Focusing point is the tip)
Included accessories

CR unit (150pf-330 ohm) 06-00073B

Conical discharge tip 12-00007A

Round discharge tip 12-00008A

Instruction manual 

Dimensions and weight

(W)83 X (H)217 X (D)229 mm (projection excluded)
Approx. 0.8kg (Cable and connector excluded)

Approx. 10.8kg (Cable included, connector excluded)


相關產品

FFT EMI Receiver

FFT EMI Receiver

靜電放電模擬器

靜電放電模擬器

靜電測試環境

靜電測試環境

靜電除電刷

靜電除電刷